[Top] [Prev] [Next] [Bottom]

Selection menu

Toggle

The toggle option allows you to turn off/on the "marching ants" border around layers and selections. This border is sometimes distracting, and prevents you from seeing what you are doing, so this is a nice option.

Invert

The Invert Selection command is used when you want to select everything but the previous selection. This usually means the background or surroundings of the selected objects. Remember that feathered selections are equally feathered when inverted, but the feathering will now do the "fuzzying" inwards, toward the object border.

Select all or none

Select all is used together with "Keep transparant" when you have several objects in a transparant layer, and want to fill all of them at the same time (most commonly a text layer, where you want to select all of the letters). You may also want to select an entire layer ( without "Keep Transparant") if you want to fill all of it with paint, and discard the objects in it. After having used the Select All option you can use Select None to get rid of it. You can of course just click at the layer with the rectangular or ellipse tool for the same result, but if you happen to drag by mistake while doing this, you will transform the selection to a float.

float

This is the command to use when you want your selection to float, but you want to make certain that it doesn't move. We have discussed the fact that you can transform a selection to a float by moving it when the select tool is still active. This will inevitable change its position by ever so little, and it will show against the background. This is really important if you took the float from the background, and there is now a "hole" in the background image where the float used to be.

feather, sharpen and border

A feathered selection is a selection which gets more transparant the closer you get to the edges. Feather allows you to blend a color or image softly with the background. You can set a feather radius, where a low radius value produces a selection with a bit more softness to the edge than usual. A maximum feather radius means that the fuzzyest parts of the selection will reach as far as more than twice the radius of the equivalent "sharp" selection, and the core of the selection will only have about half that radius. In other words, this is a v-e-r-y fuzzy selection. It is so soft that you can fill it with patterns, then with colors and then paste images into it, and all these things will blend together. If the "Keep Transparant" option is checked, filling or painting within the selection will only affect areas within this radius which have an alpha value. Also remember that feathering "blunts" the shape of the selection. Edge detail disappears in a fuzzy fog, and a hand-shaped selection with fingers will look like a softball mitt at best. You can use this to your advantage if your selection isn't as smooth as you'd like. Use feather to smooth, then grow a little to compensate for loss in size, and last - use sharpen.

Sharpen selection removes the fuzzyness in a feathered selection, and leaves only the core, which is now sharp edged. Sharpen does not restore edge detail in a feathered selection though. Sharpen is used when you change your mind about the feathering, or maybe more commonly, when you have made a fuzzy fill and want to enhance it by making a sharp fill or paste inside of the fuzzy one (a sharp selection is always smaller than a fuzzy selection).

"Border" transforms the selection to a border area. The new selection surrounds the former selection and reaches a number of pixels outside and inside of the selection edge boundary. Border is useful when working with special effects for text, or when you want to make drawings or frames from selections. When you use "Stroke" the effect may seem similar, but the big difference is that with Stroke, you never change the shape of the selection. Border creates a new selection based on the outline of the old one, and using invert on a border selects both what's inside and outside of the old selection.

grow and shrink

Grow and Shrink allows you to change the size of the selection. If the selection edge has fine details, they will disappear if you shrink/grow by many pixels. If you just want your selection to be bigger or smaller, but otherwise look the same, it's better to save the selection to a layer and apply the Scale layer command.

save to channel

If you are working with a complicated image, "Save to channel" should be used almost every time you make a selection! In this way you save the selection's shape and transparance and store it in an Alpha Channel. You can later activate this Channel and use the selection again if you need it. You can also do advanced selection editing in Alpha Channels. Read more about it in chapter x.

select by color

While you are doing this, you can see a grayscale representation of your current selection in the By Color Selection dialog. This preview works just like an Alpha Channel. White parts represent sharp selections (opaque), gray parts are for more or less feathered selections (semi-transparant), and black areas represent unselected areas (wholly transparant).

If we take a look at the Selection Modes, there are four choices; Replace, Add, Subtract or Intersect.

Replace is the standard mode, and also the most important one. With Replace you choose the basic color range which your selection will be composed of. If you are not happy with the basic selection, you can click at another place in your image, or change the fuzziness value to create a more accurate selection.

Add and Subtract are used to modify the basic selection. By pressing Add and clicking at an unselected part of the image, that color or color range will be added to the selection. Likewise, Subtract will deselect areas of unwanted color from your selection. Intersect is a little trickier to understand, but you can say that Intersect chooses, depending on the fuzziness threshold, the small stripes of intermediate color between the selection color and the adjacent color you clicked at (if you click at a color which doesn't touch the selection, you end up with no selection at all). Using Intersect usually results in selecting the thin, antialiased edges between different shapes.